External GSM and 3G Antennas

The S-Blade is a tri, quad or pentaband waterproof antenna covering the cellular, GSM and 3G frequency bands. The tri-band version supports 900/1800/1900 MHz. The quad band supports 850/900/1800 and 1900 MHz. The pentaband version supports 824-960/1710-2170 MHz.

It is of a ground plane independent design and has a robust waterproof cover to make the antenna more durable. This makes it ideal for in-vehicle applications or for discrete telemetry installations. It can be supplied with or without a high grade adhesive tape.

Check datasheet or table below for various part number options.

The CPT is a tough and durable 3G and GSM puck antenna with 2-3 dBi gain. The antenna is a screw-mount antenna requiring a 20mm hole. The cable exit is on the underside of the antenna and once mounted is totally enclosed and secure. The antenna is secured in place by a nut that is tightened from underneath. The CPT is ideal for metering, telemetry and telematics applications where a discrete antenna is required, but performance cannot be compromised. A cellular version (CPO) and 2.4/5.8 GHz (CPW) version of this antenna are also available.

Check datasheet or table below for various part number ordering options.

The CPO is a tough and durable 3G and Cellular puck antenna with 2-3 dBi gain. The antenna is a screw-mount antenna requiring a 20mm hole. The cable exit is on the underside of the antenna and once mounted is totally enclosed and secure. The antenna is secured in place by a nut that is tightened from underneath. The CPO is ideal for metering, telemetry and telematics applications where a discrete antenna is required, but performance cannot be compromised. A GSM version (CPT) and 2.4/5.8 GHz (CPW) version of this antenna are also available.

Check datasheet or table below for various part number ordering options.

The BKR2100 is a 1/2 wave dipole with a SMA-Male knuckle operating at 2.1 GHz. This is an ideal product for 3G and UMTS applications where a groundplane or a proximity groundplane is not available.

The sheath is a rubber semi-flexible housing and the knuckle joint is robust to handle repeated movements.

Check datasheet or table below for various part number ordering options.

The PTR2100 is a ½ wave dipole blade antenna covering 900/1800 and 2100 MHz for GSM and UMTS (3G) operation. It has a injection-moulded cover and comes with SMA-Male swivel joint connector that can lock in three positions. The PTR2100 offers 2 dBi peak gain.

The PTR2100 is an ideal solution for penta-band cellular applications including wireless routers, telemetry and telematics application where cellular, GSM and 3G capability is required.

Check datasheet or table below for various part number ordering options.

The TBR2100 is a ½ wave dipole antenna covering 900/1800 and 2100 MHz for GSM and UMTS (3G) operation. It has a injection-moulded flexible sheath, comes with SMA-Male swivel joint connector and can lock in three positions. The TBR2100 offers 2 dBi gain.

The TBR2100 is an ideal solution for multi-band cellular applications including wireless routers, telemetry and telematics application where GSM and 3G capability is required.

Check datasheet or table below for various part number ordering options.

The Com-Block is a low profile pentaband cellular, GSM and 3G tape-mount antenna. The Com-Block a compact tape mount antenna for mounting on either metal or non-metal surfaces. Measuring just 55x42x22mm, the Com-Block offers a discrete solutions for M2M (machine to machine) applications such as vending, gaming machines, alarm panels etc. Its cable can exit either via the side wall of the housing through a grommet or from underneath. Cable length and connectors are configurable with SMA-Male, FME-Female and MMCX as standard

Check datasheet or table below for various part number ordering options.

The WMO is a penta-band wall mount antenna covering 850/900/1800/1900/2100 i.e. cellular, GSM and 3G frequency bands.

With 2.14 dBi gain across the bands, the WMO is an effective performer where an external antenna is required especially in telemetry, metering and remote monitoring applications. The antenna is groundplane independent and can be mounted on most wall types. The WMO is supplied with a robust wall-mount bracket and 5M RG58 and SMA-Male connector. Cable and connectors configurations are customisable.

Check datasheet or table below for various part number ordering options.

The WM2100 is a penta-band wall mount antenna covering 850/900/1800/1900/2100 i.e. cellular, GSM and 3G frequency bands.

With 2.2 dBi gain across the bands, the WM2100 is an effective performer where an external antenna is required especially in telemetry, metering and remote monitoring applications. The antenna is groundplane independent and can be mounted on most wall types.

Cable and connectors configurations are customisable.

Check datasheet or table below for various part number ordering options.

The PentaMag is a multi-band magnetic antenna covering the cellular, GSM and 3G frequency bands. The exact frequency support is 824-960 and 1710-2170 MHz.

Offering a gain of 2 dBi, the PentaMag is designed for M2M (Machine to Machine), Telemetry and Telematics applications requiring wireless connectivity to multiple cellular-based frequencies including GPRS and 3G networks. The antenna is available in fixed cable and connector configurations.

Check datasheet or table below for various part number ordering options.

The PentaBlade is a penta-band external fixed-mount blade antenna covering the 850/900/1800/1900/2100 MHz frequency bands i.e. Cellular, GSM and 3G.

It is of a ground plane independent design suitable for either fixed terminal or access point applications. The PentaBlade offers 2 dBi of gain with good return loss figures and is available with a SMA-Male connector.

Check datasheet or table below for various part number ordering options.